Victron SmartSolar MPPT 150/85-MC4 VE.Can Charge Controller

Victron SmartSolar MPPT 150 VOC / 85A MC4 VE.Can Charge Controller, 5 Year Warranty. Solar charge controller: The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking: The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others. Control Your Charger Remotely: The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data. Daisy Chain Additional Units: The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device. Remote Monitoring and Control: If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520. SmartSolar Control Display: The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Specifications: Battery voltage 12 / 24 / 48V Auto Select (software tool needed to select 36V) Rated charge current 85A Nominal PV power, 12V 1a,b 1200W Nominal PV power, 24V 1a,b) 2400W Nominal PV power, 36V 1a,b) 3600W Nominal PV power, 48V 1a,b) 4900W Max. PV short circuit current 2) 70A (max 30A per MC4 conn.) Maximum PV open circuit voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Maximum efficiency 98% Self-consumption Less than 35mA @ 12V / 20mA @ 48V Charge voltage ‘absorption’ Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) Charge voltage ‘float’ Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth) Charge voltage ‘equalization’ Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable) Charge algorithm multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm Temperature compensation -16 mV / -32 mV / -64 mV / °C Protection PV reverse polarity / Output short circuit / Over temperature Operating temperature -30 to +60°C (full rated output up to 40°C) Humidity 95%, non-condensing Maximum altitude 5000m (full rated output up to 2000m) Environmental condition Indoor, unconditioned Pollution degree PD3 Data communication port VE.Direct or Bluetooth Remote on/off Yes (2 pole connector Programmable relay DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC Parallel operation Yes (notsynchronized) Colour Blue (RAL 5012) PV terminals 35 mm² / AWG2 (Tr models) Three pairs of MC4 connectors (MC4 models) Battery terminals 35mm² / AWG2 Protection category IP43 (electronic components), IP22 (connection area) Weight 4.5kg Dimensions (d x w x h) 103 x 295 x 246 Please Note: The image shown is not the correct image for this model.